Buscar

 

RI UFLA (Universidade Federal de Lavras) >
Revistas UFLA >
CERNE >

Por favor, utilize esse identificador para citar este item ou usar como link: http://repositorio.ufla.br/jspui/handle/1/14244

Título: ADHESION QUALITY OF GLUED JOINTS FROM DIFFERENT COMMERCIAL WOOD SPECIES
Autor(es): Nascimento, Alexandre Miguel do
Garcia, Rosilei Aparecida
Lucia, Ricardo Marius Della
Assunto: Wood density, polyvinyl acetate, gluing pressure, shear strength, urea-formaldehyde
Publicador: CERNE
CERNE
Publicação: 6-Abr-2016
Outras Identificações: http://www.cerne.ufla.br/site/index.php/CERNE/article/view/940
Informações adicionais: The objective of this study was to determine the effect of wood density, adhesive type and gluing pressure on the shear strength of glued joints of fourteen commercial wood species. Wood pieces were classified in three density classes (Class 1: less than 0.55 g cm-3; Class 2: from 0.55 to 0.75 g cm-3; and Class 3: greater than 0.75 g cm-3) and joints bonded with two adhesives: polyvinyl acetate (PVA) and urea-formaldehyde (UF), under two different pressures: 6 and 12 kgf cm-2. Glued joints bonded with PVA adhesive presented higher shear strength than those bonded with UF adhesive. For percentage of wood failure, the PVA adhesive had the best performance, however, only Classes 1 and 2 reached the values required by ASTM 3110 standard. Glued joints from Class 3, bonded with UF adhesive, did not reach the values of solid wood. The gluing pressure of 12 kgf cm-2 was more efficient for Class 3, for both shear strength and percentage of wood failure. 
Idioma: eng
Aparece nas coleções: CERNE

Arquivos neste Item:

Não há arquivos associados para este Item.

Itens protegidos por copyright, com todos os direitos reservados, Salvo indicação em contrário.


Mostrar estatísticas

 


DSpace Software Copyright © 2002-2007 MIT and Hewlett-Packard - Feedback