Use este identificador para citar ou linkar para este item:
Autor: Andrade, Anna Carolina de Almeida
Silva, José Reinaldo Moreira da Silva
Braga Junior, Roberto Alves
Moulin, Jordão Cabral
Palavras-chave: Solid-state laser, Wood Machining, Surface Quality
Publicador: CERNE
Data: 8-Jun-2016
Outras Identificações :
Descrição: The ASTM D 1666-11 (2011) norm classifies the quality of wood surface pieces after its mechanical processing. Although this classification is difficult to achieve visually, the use of some tools, such as solid state laser, can facilitate this classification. The aim of this work was to evaluate the use of sunset laser to qualify mechanically processed surfaces with similar visual qualities. We used a log from the base of a Khaya ivorensis tree and one from a K. senegalensis tree, both 11 years old. 22 specimens of dimensions 600x140x30 mm (CxLxE) were made of each species. The specimens were flattened with speeds of 2400, 3600 and 4000 min-1 and advanced speeds were predetermined in 6 and 15 m.min-1. Then the samples were illuminated with sunset laser and photographed at high resolution, the images were transferred to the software Image J. To evaluate the sunset laser, areas of defects in wood that are classified as regular and bad by ASTM D 1666-11 (2011) were used. There was a difference in classification of wood defects between the two methods used, from the 31 specimens classified as regularly by visual analysis, 8 of them were classified as bad by the laser method. The use of solid-state laser in the sunset laser technique was more efficient in evaluating small differences in mechanically processed wood defects compared to visual evaluation.
Idioma: eng
Aparece nas coleções:CERNE

Arquivos associados a este item:
Não existem arquivos associados a este item.

Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.