RI UFLA (Universidade Federal de Lavras) >
Revistas UFLA >
Please use this identifier to cite or link to this item:
|Title: ||EVALUATION OF WOOD SURFACE ROUGHNESS OF EUCALYPT SPECIES SUBMITTED TO CUTTERHEAD ROTATION|
|???metadata.dc.creator???: ||Lopes, Camila Santos Doubek|
Nolasco, Adriana Maria
Tomazello Filho, Mário
Dias, Carlos Tadeu dos Santos
|Keywords: ||E. dunnii, E. grandis, E. urophylla, wood machinability, roughness surface.|
|Other Identifiers: ||http://www.cerne.ufla.br/site/index.php/CERNE/article/view/1009|
|Description: ||This work evaluated the quality of roughness surface of 18 years-old Eucalyptus grandis, E. dunnii and E. urophylla trees wood, to produce prepared 48 furniture. For the laboratory essays samples/species were prepared in the machining treatments in milling machine of vertical axis, in the up milling direction, in seven cut speeds (3 to 22 m.min-1). In the evaluation of the surface quality of the wood samples it was used the surface profiling instrument Taylor Hobson model Surtronic 3+, using the filter 2CR, with sampling length of 0,80 Ie or ln (mm) and cut-off of 0,80 λc (mm). The results indicated that the E. urophylla wood presented the best surface quality and with the smallest values of variation coefficient; the E. grandis wood showed intermediate values and E. dunnii wood presented the worst performance, as well as the largest value of variation coefficient. It was observed, also, that the treatment effect for the three eucalyptus wood species was related with the machining speed; better in the 3-4 m.min-1 and worse in the 22 m.min-1. The surface quality of the machined wood was related to its density, with the eucalyptus species of denser wood presenting the best quality of machined surface. |
|Appears in Collections:||CERNE|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.