Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/33112
metadata.artigo.dc.title: Urea formaldehyde and cellulose nanocrystals adhesive: studies applied to sugarcane bagasse particleboards
metadata.artigo.dc.creator: Mesquita, Ricardo Gabriel de Almeida
Mendes, Lourival Marin
Sanadi, Anand Ramesh
Sena Neto, Alfredo Rodrigues de
Claro, Pedro Ivo Cunha
Corrêa, Ana Carolina
Marconcini, José Manoel
metadata.artigo.dc.subject: Natural fiber
Amino resin
Chipboards
Thermosetting
Nanotechnology
metadata.artigo.dc.publisher: Springer
metadata.artigo.dc.date.issued: Jul-2018
metadata.artigo.dc.identifier.citation: MESQUITA, R. G. de A. et al. Urea formaldehyde and cellulose nanocrystals adhesive: studies applied to sugarcane bagasse particleboards. Journal of Polymers and the Environment, [S.l.], v. 26, n. 7, p. 3040–3050, July 2018.
metadata.artigo.dc.description.abstract: The aim of this research was to investigate the behavior of urea formaldehyde (UF) adhesive based particleboards using sugarcane bagasse (SCB), with and without the addition of cellulose nanocrystals (NCC). In the first step of this research study, the interaction between UF and the NCC was evaluated. The NCC were dispersed in the UF, in different proportions (0, 0.5, 1, 2, 3 and 5%). Subsequent to this, the mixtures were dried, milled, and put in molds, to produce flexural specimens. The second step involved evaluation of the interaction between the NCC, UF, and SCB. After sonication, the NCC and UF were applied on the SCB particles to produce particleboards. They were evaluated according to the modulus of elasticity and rupture, water absorption (WA), and thickness swelling. The viscosity of the mixture of NCC and UF increased according to the NCC increase load. At 5% of NCC load, the viscosity increased greatly, which prevented adhesive dispersion in the particleboard. The thermogravimetric analysis of UF showed that better conditions of processing were at 160 °C for 8 min, so these parameters were used to produce the specimens. SCB is a promising raw material for particleboard, and its potential to produce SCB particleboards with relatively good performance was demonstrated. For the particleboards specimens, the best performance was observed with 1% of NCC. Particleboards did not show improvement compared with UF specimens, probably because bond links were not sufficient. Addition of NCC in UF increased the liquid suspension viscosity, and the specimens showed a better mechanical performance.
metadata.artigo.dc.identifier.uri: https://link.springer.com/article/10.1007/s10924-018-1189-4
http://repositorio.ufla.br/jspui/handle/1/33112
metadata.artigo.dc.language: en_US
Appears in Collections:DEG - Artigos publicados em periódicos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.