Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/34596
Full metadata record
DC FieldValueLanguage
dc.creatorKäfer, Karine Andrea-
dc.creatorBernardi, Heide Heloise-
dc.creatorSantos, Osmar de Sousa-
dc.creatorOtubo, Larissa-
dc.creatorLima, Nelson Batista de-
dc.creatorOtubo, Jorge-
dc.date.accessioned2019-06-04T12:33:12Z-
dc.date.available2019-06-04T12:33:12Z-
dc.date.issued2018-
dc.identifier.citationKÄFER, K. A. et al. The influence of microstructure and mechanical resistance on the shape memory of ecae processed stainless Fe-Mn-Si-Cr-Ni-Co steel. Materials Research, São Carlos, v. 21, n. 5, 2018.pt_BR
dc.identifier.urihttp://repositorio.ufla.br/jspui/handle/1/34596-
dc.description.abstractIn the current work, XRD, SEM, EBSD and TEM techniques were used to evaluate the microstructure of stainless Fe-Mn-Si-Cr-Ni-Co shape memory steel processed by ECAE and annealed for one hour at temperatures ranging from 650ºC to 950ºC. The results were then correlated with the mechanical and shape-memory properties of the steel. It was observed that the samples containing large grains and a microstructure free of defects or precipitates presented a high volume fraction of multi-variant thermal martensite and stress-induced martensite, resulting in good shape recovery, owing to the memory effect. The grain refinement and precipitation of second-phase particles decreased the volume fraction and number of martensite variants and considerably increased the mechanical resistance, enhancing the elastic shape recovery. It was shown that shape memory properties were essentially related to the mechanical resistance of the matrix, which in turn was related to the microstructure.pt_BR
dc.languageen_USpt_BR
dc.rightsAttribution 4.0 International*
dc.rightsacesso abertopt_BR
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceMaterials Researchpt_BR
dc.subjectStainless shape memory steelpt_BR
dc.subjectEqual Channel Angular Extrusion (ECAE)pt_BR
dc.subjectGrain sizept_BR
dc.subjectSecond-phase particlespt_BR
dc.subjectMartensitic transformationpt_BR
dc.titleThe influence of microstructure and mechanical resistance on the shape memory of ecae processed stainless Fe-Mn-Si-Cr-Ni-Co steelpt_BR
dc.typeArtigopt_BR
Appears in Collections:DEG - Artigos publicados em periódicos

Files in This Item:
File Description SizeFormat 
ARTIGO_The influence of microstructure ....pdf4,04 MBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons