Use este identificador para citar ou linkar para este item: http://repositorio.ufla.br/jspui/handle/1/42580
Registro completo de metadados
Campo DCValorIdioma
dc.creatorFaria, Douglas Lamounier-
dc.creatorMesquita Júnior, Laércio-
dc.creatorMesquita, & Ricardo Gabriel de Almeida-
dc.creatorGuimarães Júnior, Mário-
dc.creatorPires, Natal Junio-
dc.creatorMendes, Lourival Marin-
dc.creatorGuimarães Junior, José Benedito-
dc.date.accessioned2020-08-21T16:40:56Z-
dc.date.available2020-08-21T16:40:56Z-
dc.date.issued2020-
dc.identifier.citationFARIA, D. L. et al. Production of castor oil-based polyurethane resin composites reinforced with coconut husk fibres. Journal of Polymer Research, [S. l], v. 27, 2020. DOI: https://doi.org/10.1007/s10965-020-02238-7.pt_BR
dc.identifier.urihttps://link.springer.com/article/10.1007/s10965-020-02238-7pt_BR
dc.identifier.urihttp://repositorio.ufla.br/jspui/handle/1/42580-
dc.description.abstractIn recent years, coconut tree cultivation has intensified worldwide. Therefore, it is necessary to analyse the agribusiness of coconut residues and the environmental impacts that its waste can cause to slow degradation of approximately eight years. Considering this and knowing that coconut is a highly reusable product, the aim of the present study was to investigate the physical, mechanical and microstructural properties of castor oil-based polyurethane resin composites, reinforced with different contents coconuts husk fibres. The coconut husk fibres were characterized according to chemical composition, basic density, pH and surface SEM images. The composites with dimensions of (200 × 200 × 3 mm) were produced by hand lay-up, in which the resin was mixed at magnetic shaking in a beaker at 150 rpm for 5 min under vacuum with the coconut husk fibres. Then, the mixture was placed in a mould and pressed at 1 MPa at room temperature. Four different compositions were tested: 30, 50, 65 and 75% coconut husk fibres. Specimens were obtained from the composites to perform tensile tests, determine the bulk density and water absorption, as well as visualize the matrix-reinforcement interface using SEM. The results showed no significant differences between the compositions for water absorption, bulk density and modulus of elasticity (MOE) obtained in the tensile tests. The tensile strength of the composites tended to increase as greater amounts of coconut husk fibres were added to the matrix. The averages were around 4.39 to 5.64 MPa for composites with 30 and 75% fibres, respectively. The photomicrographs obtained using SEM indicated detachment between the matrix and the reinforcement, which may be attributed to the high levels of extractives (19.78%) present in the fibres. The tests showed the viability of replacing polymer with fibres, in levels of up to 75%. Access provided by Universita degli Studi di Ppt_BR
dc.languageen_USpt_BR
dc.publisherSpringerpt_BR
dc.rightsrestrictAccesspt_BR
dc.sourceJournal of Polymer Researchpt_BR
dc.subjectThermoset matricespt_BR
dc.subjectBiocompositespt_BR
dc.subjectMechanical propertiespt_BR
dc.subjectCocos nuciferapt_BR
dc.subjectMatrizes termofixaspt_BR
dc.subjectBiocompósitospt_BR
dc.subjectPropriedades mecânicaspt_BR
dc.titleProduction of castor oil-based polyurethane resin composites reinforced with coconut husk fibrespt_BR
dc.typeArtigopt_BR
Aparece nas coleções:DCF - Artigos publicados em periódicos
DEG - Artigos publicados em periódicos

Arquivos associados a este item:
Não existem arquivos associados a este item.


Os itens no repositório estão protegidos por copyright, com todos os direitos reservados, salvo quando é indicado o contrário.