Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/36296
Full metadata record
DC FieldValueLanguage
dc.creatorGonçalves, Vinicius O. O.-
dc.creatorCiotonea, Carmen-
dc.creatorArrii-Clacens, Sandrine-
dc.creatorGuignard, Nadia-
dc.creatorRoudaut, Christelle-
dc.creatorRousseau, Julie-
dc.creatorClacens, Jean-Marc-
dc.creatorRoyer, Sébastien-
dc.creatorRichard, Frédéric-
dc.date.accessioned2019-08-16T17:12:26Z-
dc.date.available2019-08-16T17:12:26Z-
dc.date.issued2019-10-05-
dc.identifier.citationGONÇALVES, V. O. O. et al. Effect of the support on the hydrodeoxygenation of m-cresol over molybdenum oxide based catalysts. Applied Catalysis. B: Environmental, [S.l.], v. 214, p. 55-66, Oct. 2017. DOI: 10.1016/j.apcatb.2017.05.003.pt_BR
dc.identifier.urihttps://www.sciencedirect.com/science/article/pii/S0926337317303946pt_BR
dc.identifier.urihttp://repositorio.ufla.br/jspui/handle/1/36296-
dc.description.abstractThe hydrodeoxygenation (HDO) of m-cresol was investigated over supported molybdenum oxide catalysts at 340 °C under 4 MPa as total pressure. All catalysts were fully characterized using several techniques such as atomic absorption, N2 physisorption, XRD, H2-TPR, NH3-TPD, Raman spectroscopy, TEM analysis and oxygen chemisorption. It was noted that the reducibility of molybdenum species depends on the support used and follows the same order than the one determined from the HDO activity, i.e. MoOx/Al2O3 > MoOx/SBA–15 > MoOx/SiO2. In addition, the use of an ordered mesoporous silica support (SBA-5) or an acidic support (Al2O3) favored significantly the dispersion of MoOx particles compared to SiO2. Under these experimental conditions, m-cresol transformation underwent through two parallel deoxygenation routes which involved either the direct CO bond scission leading to toluene (DDO route), or the total hydrogenation of the aromatic ring yielding mainly to a mixture of methylcyclohexene isomers (HYD route). Regardless of the support used, the DDO route was always predominant. A reaction mechanism was proposed to explain the formation of toluene, the main product observed from HDO of m-cresol. To explain the formation of this aromatic, a selective adsorption through the oxygen atom of the phenolic reactant on oxygen vacancies, acting as HDO active sites, was proposed.pt_BR
dc.languageen_USpt_BR
dc.publisherElsevierpt_BR
dc.rightsrestrictAccesspt_BR
dc.sourceApplied Catalysis. B: Environmentalpt_BR
dc.subjectM-Cresolpt_BR
dc.subjectHDOpt_BR
dc.subjectMoOx/SBA-15pt_BR
dc.subjectMoOx/SiO2pt_BR
dc.subjectMoOx/Al2O3pt_BR
dc.subjectMeta-cresolpt_BR
dc.subjectHydrodeoxygenation (HDO)pt_BR
dc.titleEffect of the support on the hydrodeoxygenation of m-cresol over molybdenum oxide based catalystspt_BR
dc.typeArtigopt_BR
Appears in Collections:DEG - Artigos publicados em periódicos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.