Use este identificador para citar ou linkar para este item: http://repositorio.ufla.br/jspui/handle/1/42362
Registro completo de metadados
Campo DCValorIdioma
dc.creatorVega, F. A. Obando-
dc.creatorRios, A. P. Montoya-
dc.creatorDamasceno, F. A.-
dc.creatorSaraz, J. A. Osorio-
dc.creatorNascimento, J. A. Costa do-
dc.date.accessioned2020-08-12T12:31:15Z-
dc.date.available2020-08-12T12:31:15Z-
dc.date.issued2020-
dc.identifier.citationVEGA, F. A. O. et al. Airflow profile study of a compost dairy barn using a low-cost 3D-printed anemometer network. Agronomy Research, [S. l.], v. 18, p. 931-944, 2020. Especial issue 1.pt_BR
dc.identifier.urihttp://repositorio.ufla.br/jspui/handle/1/42362-
dc.description.abstractMechanical ventilation is commonly used for environmental thermal regulation inside closed-field agricultural production systems. Analyzing the air distribution inside these facilities and the correct operation of the fans can be a challenging. This could be determined using cost prohibitive techniques as particle image velocimetry or deploying large wind sensors networks on-site. To avoid this limitation without a lack of measurement accuracy, this research was focused on developing and test a low-cost anemometer network based in low cost propeller’s anemometers, built using fused 3D-printed and open-hardware platforms. Four propeller anemometers with three to six blades were simulated using the 6-DOF method of ANSYS computer fluid dynamics software. Similar results were obtained for all the simulated models with minor differences. Anemometers were tested in an open circuit wind tunnel before to be evaluated in two open compost dairy barn building using high-volume low-speed and low-volume high-speed fans. Data were analyzed by employing contour maps, descriptive statistics and correlation. The results show that the anemometer network determines the fan’s wind profile for wind speeds over 0.7 m s-1 and it was possible to determine the facilities spots with ventilation problems. The proposed anemometer network and methodology are a good alternative to analyze the operating conditions of the tested agricultural facilities and optimize its performance.pt_BR
dc.languageen_USpt_BR
dc.publisherFaculty of Agronomy, Estonian Agricultural Universitypt_BR
dc.rightsAttribution 4.0 International*
dc.rightsacesso abertopt_BR
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceAgronomy Researchpt_BR
dc.subjectVentilation optimizationpt_BR
dc.subjectWind tunnelpt_BR
dc.subjectSensor networkpt_BR
dc.subjectDirectional anemometerpt_BR
dc.subjectCompost barnpt_BR
dc.subjectOtimização de ventilaçãopt_BR
dc.subjectTúnel de ventopt_BR
dc.subjectRede de sensorespt_BR
dc.subjectAnemômetro direcionalpt_BR
dc.subjectCeleiro de compostagempt_BR
dc.titleAirflow profile study of a compost dairy barn using a low-cost 3D-printed anemometer networkpt_BR
dc.typeArtigopt_BR
Aparece nas coleções:DEG - Artigos publicados em periódicos

Arquivos associados a este item:
Arquivo Descrição TamanhoFormato 
ARTIGO_Airflow profile study of a compost dairy barn using a low-cost 3D-printed anemometer network.pdf829,42 kBAdobe PDFVisualizar/Abrir


Este item está licenciada sob uma Licença Creative Commons Creative Commons