Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/48073
Full metadata record
DC FieldValueLanguage
dc.creatorFaria, Douglas Lamounier-
dc.creatorLopes, Thamirys Andrade-
dc.creatorScatolino, Mário Vanoli-
dc.creatorSoriano, Julio-
dc.creatorMendes, Lourival Marin-
dc.creatorGuimarães Júnior, José Benedito-
dc.date.accessioned2021-09-08T19:06:08Z-
dc.date.available2021-09-08T19:06:08Z-
dc.date.issued2020-09-
dc.identifier.citationFARIA, D. L. et al. Static bending of glulam beams manufactured with rubber wood and epoxy adhesive. Revista Matéria, Rio de Janeiro, v. 25, n. 3, e-12804, 2020. DOI: https://doi.org/10.1590/S1517-707620200003.1104.pt_BR
dc.identifier.urihttp://repositorio.ufla.br/jspui/handle/1/48073-
dc.description.abstractThe aim of this study was to evaluate the properties of Hevea brasiliensis wood wastes for production structural pieces of glued laminated (glulam) timber. Three trees with age close to 25 years and diameter at breast height (DBH) higher than 500 mm were obtained. The basic density of the wood were quantified, as well as the stiffness and the strength in static bending, shear strength and parallel compression to grain and hygroscopic equilibrium moisture. The beams of glulam were evaluated according to the modulus of elasticity (MOE), modulus of rupture (MOR) and delamination. Due to the bending properties MOR (75.14 MPa) and MOE (8166.79 MPa), as well as the shear strength (12.29 MPa) obtained, was concluded by the suitability of the rubber wood for the production of glulam beams. The composite beams presented values of MOR (75.14 MPa) and MOE (8166.79 MPa) compatible with species traditionally used in the production of glulam beams. The adhesive bond quality was verified by the delamination test, presenting delamination of 4.95 %, indicating its use for internal and external environments.pt_BR
dc.languageenpt_BR
dc.publisherUniversidade Federal do Rio de Janeiro/ Associação Brasileira do Hidrogênio (ABH2)pt_BR
dc.rightsacesso abertopt_BR
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/*
dc.sourceRevista Matériapt_BR
dc.subjectCompositept_BR
dc.subjectWoodpt_BR
dc.subjectBond resistancept_BR
dc.subjectStatic bendingpt_BR
dc.subjectLamínulapt_BR
dc.subjectAdesivo epóxipt_BR
dc.subjectMadeira de borrachapt_BR
dc.subjectFlexão estáticapt_BR
dc.titleStatic bending of glulam beams manufactured with rubber wood and epoxy adhesivept_BR
dc.typeArtigopt_BR
Appears in Collections:DCF - Artigos publicados em periódicos
DEG - Artigos publicados em periódicos

Files in This Item:
File Description SizeFormat 
ARTIGO_Static bending of glulam beams manufactured with rubber wood and epoxy adhesive.pdf425,56 kBAdobe PDFView/Open


This item is licensed under a Creative Commons License Creative Commons