Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/12731
Title: The use of lignocellulosic byproducts and cellulose nanocrystals within particleboard production
Other Titles: Utilização de produtos lignocelulósicos e nanocristais de celulose na produção de painéis particulados
Authors: Mendes, Lourival Marin
Savastano Júnior, Holmer
Thygesen, Lisbeth Garbrecht
Oliveira, Juliano Elvis
Abreu, Luciana Barbosa de
Carvalho, Amélia Guimarães
Keywords: Fibras vegetais
Uréia-formaldeído
Medium density particleboard (MDP)
Painéis articulados
Plant fibers
Urea formaldehyde
Articulated Panels
Issue Date: 12-Apr-2017
Publisher: Universidade Federal de Lavras
Citation: MESQUITA, R. G. de A. The use of lignocellulosic byproducts and cellulose nanocrystals within particleboard production. 2017. 153 p. Tese (Doutorado em Ciência e Tecnologia da Madeira)-Universidade Federal de Lavras, Lavras, 2017.
Abstract: The objective of this work was to study the particleboard production using Eucalyptus particles, sisal filaments, coconut filaments (coir) and sugarcane bagasse particles (SCB). All particleboards were made in three layers (face / core / face) using urea-formaldehyde adhesive (UF). Coir and sisal filaments were used in association with Eucalyptus particles, only in the inner layer (core), in proportions of 0, 10 and 20%. The SCB particles were separated into pith and fibers and the particleboards were made using only fibers and using fibers on the faces and pith in the core. SCB particleboards were also manufactured using 1% of cellulose nanocrystals (NCC), by adhesive mass, on the faces of the particleboards. The proportion of NCC was defined using urea-formaldehyde specimens, reinforced with different proportions of NCC (0, 0.5, 1, 2, 3 and 5%). For the particleboards production, a pressing cycle was used with the following characteristics: temperature of 160°C, pressure of 4 MPa and time of 8 minutes. The properties evaluated were: water absorption (WA), thickness swelling (TS), density, compaction ratio, modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB) and thermal conductivity (TC). The particleboards reinforced with sisal did not show satisfactory results for most of the properties evaluated (MOE, MOR, WA, IB and TC), but those reinforced with coconut, showed properties very similar to the particleboards made only with Eucalyptus particles, demonstrating the potential of this material. The filaments of sisal formed tufts that impaired the dispersion of the adhesive inside the tufts, reflecting in poor physical-mechanical properties. The specimens of UF reinforced with NCC (1, 2 and 3%) presented higher results (MOE and MOR) than non-reinforced specimens did, but the same was not observed when the NCC were applied in the SCB particleboards. NCC were probably able to bind with the adhesive, decreasing the amount of sites for the bonds between the adhesive and SCB particles. Particleboards made with fibers and fibers/pith showed properties statistically equal for most properties (MOE, MOR, WA and TC). SCB showed potential for MDP production.
URI: http://repositorio.ufla.br/jspui/handle/1/12731
Appears in Collections:Ciência e Tecnologia da Madeira - Doutorado (Teses)



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.