Please use this identifier to cite or link to this item: http://repositorio.ufla.br/jspui/handle/1/31380
metadata.artigo.dc.title: Functionally graded MDP panels using bamboo particles
metadata.artigo.dc.creator: Teodoro, Raquel
Raabe, Joabel
Silva, Danillo Wisky
Mendes, Rafael Farinassi
Mendes, Lourival Marin
Tonoli, Gustavo Henrique Denzin
metadata.artigo.dc.subject: Cellulose fibers
Lignocellulosic fibers
Particleboards
metadata.artigo.dc.publisher: Trans Tech Publications
metadata.artigo.dc.date.issued: 2016
metadata.artigo.dc.identifier.citation: TEODORO, R. et al. Functionally graded MDP panels using bamboo particles. Key Engineering Materials, [S.l.], v. 668, p. 39-47, 2016.
metadata.artigo.dc.description.abstract: MDP (medium density particleboard) panels are normally graded in composition along their cross-section, using low-size particles and high concentration of adhesive on the particleboard surface (leading to improved physical and mechanical properties), and high-size particles in the particleboard core (interior), which provide higher porosity. Then, the aim of this study was to evaluate the impact of using different contents of bamboo particles in the particleboard core, on their physical and mechanical properties. The production of the panels was carried out using Pinus oocarpa (P) and Bambusa vulgaris var. Vittata (B) particles in different contents (100% P, 100% B, 50% de B e 50% de P, 25% de B e 75% de P, 75% de B e 25% de P) in the core of the particleboards. The face of the particleboards were composed of P particles. The panels were produced with nominal density of 0.70 g/cm3, 40:60 face:core relation, 11% urea-formaldehyde adhesive in the faces and 8% adhesive for the core, specific pressure of 3.92 MPa, 160 °C temperature and pressing time of 8 min. After seasoning, the panels were submitted to evaluation of the thickness swelling (TS) and water absorption (WA) after 2 and 24 h of immersion, apparent density (AD), internal bonding (IB), modulus of rupture (MOR) and modulus of elasticity (MOE) under static bending. There was no statistical difference between the treatments for AD, IB, MOR and MOE values. Panels produced with high contents of bamboo particles (100% B, 75% B e 50% B) in the core, presented the lower WA and TS values, leading to improved dimensional stability than panels with only pinus particles. The present results show the important impact of using functionally gradation and bamboo particles on the physical properties of the MDP panels produced.
metadata.artigo.dc.identifier.uri: https://www.scientific.net/KEM.668.39
http://repositorio.ufla.br/jspui/handle/1/31380
metadata.artigo.dc.language: en_US
Appears in Collections:DCF - Artigos publicados em periódicos
DEG - Artigos publicados em periódicos

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.